About the thickness of stainless steel sink
Pressing sink, the panel is about 1.0 to 1.2, It's difficult for pressing when it get to thicher, and the basin body of the stretch sink depends on the material, generally the thichness is thin, just like blowing the balloon, the sphere is very thin. The thickness is about 0.5 to 1.0mm. Of course, the thickness of the basin is the thicker the better, after all, most of the bump is also inside in the basin . But the technology decides that the thickness can not be too thick, at most 1.0 is good.
For handmade sink is another way out. There are many kinds of handmade sink with thick panel, panel thickness could be 2.0 to 5.0, the thickness is not the thicker the better, the thicker the heavier of the sink, also lost the flexibility of the stainless steel material itself, there are certain defects in producing. Thus the stainless steel sink can not be too thick, because the handmade sink needs bending, welding and so on. More than 1.5 thickness of the plate is difficult to bend machining.
Generally, handmade sink is 1.2mm in the international standard thickness. It is a integral thickness of the sink, no thicker panel, thinner basin. It's all integrated. 1.2mm thick stainless steel material, in the processability, the flexibility of the material itself will be very good play, so many world brands use the material is this thickness.
So stainless steel sink is not the thicker the better, you got it?
