Everyone is familiar with the sink, but for most people to install their own is more difficult, it has high requirements for professionalism, improper installation may cause serious problems such as large area water leakage, may also block the pipeline, Stainless steel sink is now the preferred choice of most owners, the specific installation steps and precautions we understand is not very in place, today let me and you talk about the stainless steel sink installation steps and matters that need attention.
First, stainless steel sink installation steps
1. Install the Angle valve
Install the Angle valve before the sink installation. In order to avoid damage to the external surface of the faucet during the faucet installation, the faucet sleeve or the faucet plastic bag should be placed on the faucet for the installation operation of the faucet.
2. hot and cold water pipe connection
When connecting the water pipe, the left end of the faucet is connected with the hot water pipe, and the right end is connected with the cold water pipe.
3. Install bellows and braided pipes
After the end of the above work, that is, the installation of the bellows and braided pipes, we must pay attention to the size of the tightening force, too large is easy to damage the thread, too small may leak because the seal is not in place.
4. water debugging
After the installation is completed, do the water debugging of the stainless steel sink, observe whether there is water leakage and seepage, find the problem and deal with it in time.
Second, stainless steel sink installation precautions
1. the sink location should be reserved
Reserve the sink position, provide the rough size of the sink when ordering the sink to ensure that the sink can match the reserved position, so as to avoid rework caused by ordering discrepancy; At the same time, pay attention to the tightness of the connection as much as possible during the installation.
2. Install the faucet and water inlet pipe first
The faucet and water inlet pipe should be installed before installing the sink, and make sure that the end of the water inlet
pipe on the faucet is correctly connected to the water inlet switch before installing the sink.
3. Put the sink on the table
After putting into the sink table, it is necessary to pay attention to the installation of matching hanging pieces between the tank and the table, so as to ensure that the sink is firmly installed, and the tank can not be shaken from side to side. At the same time, it is necessary to ensure that the stainless steel sink is installed before installation, and it must be installed according to the height of the cabinet operating table, to avoid rabbits, and to affect the convenient use of the sink.
4. The water pipe must be drained during installation
Be sure to drain the water pipe before installing the sink. If the water pipe is not drained during installation, it will lead to water leakage and rust in the sink in the future, and it will cost a lot of money when it is repaired.
The above is the stainless steel sink installation steps shared by Xiaobian for you, and the relevant knowledge of stainless steel sink installation precautions. I hope it will help you. If you want to know more about the stainless steel sink, please continue to pay attention to the complete installation network.
